Theory: Mass Defect, Binding Energy, and Q-Values

Why Binding Energy Matters

Every nuclear technology, from reactors to medical isotopes to fusion research, depends on one fact: a nucleus weighs less than the protons and neutrons it is made of. The missing mass has become the binding energy that holds the nucleus together, through Einstein's E = mc². The way binding energy per nucleon changes across the elements explains why splitting heavy nuclei (fission) and joining light ones (fusion) both release energy, and it lets an analyst work out exactly how much energy any decay or reaction releases from a table of masses.

Mass Defect and Binding Energy

Atomic masses are measured very precisely with mass spectrometers and tabulated in unified atomic mass units (u). The mass defect Δm is the difference between the mass of the separate nucleons and the mass of the atom. Using the mass of the hydrogen atom for each proton means the electron masses cancel. One atomic mass unit is equivalent to 931.494 MeV.

Mass Defect and Binding Energy Δm = Z m_H + N m_n − M_atom   (m_H = 1.007825 u, m_n = 1.008665 u)
BE = Δm × 931.494 MeV/u     BE/A = binding energy per nucleon
Larger BE/A = more tightly bound, more stable nucleus

The Binding Energy Curve

BE/A rises steeply through the light nuclei, peaks at about 8.8 MeV per nucleon near iron and nickel (Ni-62 is the most tightly bound, just ahead of Fe-56), and then falls slowly to about 7.6 MeV for uranium. Moving towards the peak releases energy. Splitting U-235 into two mid-mass fragments raises BE/A by almost 1 MeV per nucleon, which is about 200 MeV per fission. Fusing hydrogen isotopes into helium raises BE/A even more per nucleon. Alpha particles (He-4) are unusually tightly bound for their size, which is why heavy nuclei emit them.

Q-Values of Decays and Reactions

The Q-value is the energy released by a decay or reaction. It equals the mass lost, converted to energy. A positive Q means the process can happen spontaneously or releases energy. When a nucleus at rest splits into two products, they fly apart with equal and opposite momentum, so the lighter product carries most of the kinetic energy. This is why alpha particles from a given nuclide have a single, sharp energy, while beta particles, which share their energy with an antineutrino, have a continuous spectrum.

Q-Value and Energy Sharing Q = [Σ m(reactants) − Σ m(products)] × 931.494 MeV
Two products from rest: KE_light = Q × A_heavy / (A_light + A_heavy)
α decay: KE_α = Q (A − 4)/A
Energy per kg = Q (J) × N_A / molar mass (kg/mol)

Data Used in This Lab

NuclideAtomic mass (u)NuclideAtomic mass (u)
n1.008665H-11.007825
H-22.014102H-33.016049
He-44.002602Co-60 / Ni-6059.933817 / 59.930786
Kr-9291.926173Ba-141140.914403
Pb-206 / Po-210205.974465 / 209.982874Rn-222 / Ra-226222.017578 / 226.025410
Th-234234.043601U-235 / U-238235.043928 / 238.050787

Atomic masses from the Atomic Mass Evaluation (AME), rounded to six decimal places, as used in the DOE Fundamentals Handbook (Nuclear Physics and Reactor Theory, Module 1). The fission shown is one of many possible splits; the prompt Q-value here (about 173 MeV) excludes the energy released later by fission-product decay, which brings the total recoverable energy to about 200 MeV per fission.

Power

One kilogram of U-235 fully fissioned releases about as much energy as 2 to 3 million kilograms of coal.

Fusion

D–T fusion gives 14.1 MeV neutrons, which set the shielding and materials problems of fusion reactors.

Spectroscopy

Sharp alpha energies (Po-210: 5.30 MeV) identify nuclides in alpha spectrometry of environmental samples.

Using the Curve, the Semi-Empirical Formula, and Thresholds

Because Q equals the gain in total binding energy, the BE/A curve gives quick energy estimates: moving 235 nucleons from 7.6 MeV to about 8.5 MeV releases roughly 200 MeV. The semi-empirical (liquid-drop) mass formula explains the curve with five terms: a volume term proportional to A, a surface term, the Coulomb repulsion of the protons, an asymmetry term that favours N ≈ Z, and a pairing term. For an endothermic reaction (Q < 0) the projectile must bring more than |Q|, because momentum must be conserved: the threshold is E_th = −Q(1 + m_a/m_A). A charged projectile must also approach the target against the Coulomb barrier, E_C ≈ 1.44 Z₁Z₂/R MeV with R in femtometres; neutrons feel no barrier.

Apparatus

The instruments and references behind mass and energy measurements. In the simulation these are modelled for you, and the readings correspond to what each would report.

Mass spectrometer
Ions bend in a magnetic field by an amount set by their mass; precision instruments measure masses to better than one part in 10⁸.
Penning trap
Measures an ion's cyclotron frequency in a strong magnet; the source of today's most precise atomic masses.
Alpha spectrometer
A silicon detector in vacuum measures alpha energies to identify Po-210, Ra-226, and uranium isotopes.
He 4 4.002602Fe 56 55.934936U 235 235.043928U 238 238.050787
Atomic mass tables
The Atomic Mass Evaluation lists every measured mass with its uncertainty.
Binding energy curve
BE/A against A: the curve that explains both fission and fusion energy.
Calculator
Keep six decimal places in masses: the mass defect is a small difference between large numbers.

Instructions: Running the Virtual Experiment

You are preparing an energy analysis for a briefing on fission and fusion. The simulation has two immersive 3D work areas and two graph work areas. The parts build from undergraduate work in Parts A and B to graduate-level analysis in the last step of Parts C and D; the level of each part is shown beside its title. In each one you take measurements, work out the answer yourself, enter it, and press Check. Record every reading and calculation in your lab report tables (modelled in the Example Report), with a labelled screenshot of each setup. Drag in any 3D view to orbit, and scroll to zoom. Keep six decimal places in every mass.

Part A: Binding Energy across the Elements (3D Mass Spectrometer)Undergraduate
1
Open Simulation → 3D Mass Spectrometer, choose He-4, and press Measure mass. Choose Predict: mass defect, calculate Δm, and check it.
2
Check the binding energy and the binding energy per nucleon. Press Record this run.
3
Repeat for H-2, Li-7, C-12, O-16, Fe-56, Ni-62, Sn-120, Pb-208, U-235, and U-238. Record them all in Table A and plot BE/A against A. Mark the peak, and use the curve to explain why fission and fusion both release energy.
Part B: Q-Values of Decays and Reactions (3D Reaction Bench)Undergraduate
1
Open 3D Reaction Bench, choose Ra-226 → Rn-222 + α, and press Run reaction. Check the mass lost and the Q-value.
2
Choose Predict: kinetic energy of the light product, calculate the alpha energy, and check it. Press Record this run. Repeat for U-238 and Po-210.
3
Run Co-60 β⁻ decay and check its Q-value. Try to predict the electron energy and explain the message you receive.
4
Run D + T fusion and U-235 fission. Check Q for each, the neutron energy from fusion, and the energy per kg of fuel for both. Record all reactions in Table B and compare fusion and fission per kilogram.
Part C: Energy from the Binding-Energy Curve (Graph: Binding-Energy Curve)Upper undergraduateGraduate step
1
Open Graph: Binding-Energy Curve. Using the BE/A values in the Readings panel, check the fission energy of U-235 estimated from the curve and the D–T fusion Q from binding energies. Compare each with your Table B result from Part B.
2
Highlight He-4, C-12, Fe-56, Sn-120, Pb-208 and U-235 in turn. For each, check the BE/A from the semi-empirical formula and press Record this run. Record all six in Table C.
3
From the graph, state where the semi-empirical formula works well and where it fails, and explain why He-4 sits so far above the curve. Take a labelled screenshot of the graph for your report.
4
GraduateCheck the Q for symmetric fission of U-236 into two Pd-118 from the semi-empirical formula. Compare it with the curve estimate and with the mass-based Q for the Ba-141 + Kr-92 split, and explain which formula term makes fission release energy.
Part D: Q-Values, Coulomb Barriers, and Thresholds (Graph: Q-Values and Thresholds)Upper undergraduateGraduate step
1
Open Graph: Q-Values and Thresholds. Choose ¹⁴N(α,p)¹⁷O. Check the Q-value and the Coulomb barrier. Press Record this run.
2
Repeat for the other six reactions. For the neutron-induced reactions, try the Coulomb barrier and explain the message you receive. Record all seven in Table D, and mark which are exothermic.
3
Use the chart to explain why ¹⁰B(n,α) and ⁶Li(n,α) are used to detect thermal neutrons, while ⁷Li(p,n) and ³H(p,n) are used as accelerator neutron sources.
4
GraduateFor each endothermic reaction, check the threshold kinetic energy E_th = −Q(1 + m_a/m_A). Add it to Table D and explain why it is larger than |Q|, and why the fast-neutron reaction ¹⁶O(n,p)¹⁶N produces radioactive N-16 in reactor cooling water.

Simulation: Mass Spectrometer, Reaction Bench, and Energy Graphs

Binding Energy and Q-Value Virtual LabSet up the equipment, work out your answer, then Check

Choose a nuclide and measure its atomic mass. Using atomic masses (which include the electrons) with the mass of the hydrogen atom for each proton keeps the electron masses balanced. Part A uses this work area.

About this work area: The mass spectrometer measures the atomic mass of the chosen nuclide. The Readings panel gives Z, A, the measured atomic mass, the hydrogen-atom and neutron masses, and the mass–energy conversion factor, and every measurement is announced.

Setup

Readings

Nuclide (Z, A)—
Measured atomic mass M—
Hydrogen atom mass m_H—
Neutron mass m_n—
Energy equivalent of 1 u—

Masses are from the Atomic Mass Evaluation, in unified atomic mass units (u).

Work it out, then check

Table A: your binding energy record
NuclideZNM (u)Δm (u)BE (MeV)BE/A (MeV)

Choose a decay or reaction and run it. The Q-value is the energy released, equal to the mass lost times c². Part B uses this work area.

About this work area: The reaction bench runs the chosen decay or reaction. The Readings panel gives the atomic masses of the reactants and products, and every run is announced.

Setup

Readings

Reactant atomic masses—
Product atomic masses—
Energy equivalent of 1 u—
Last run—

For two products from reactants at rest, momentum is shared equally, so the lighter product takes the larger share of the energy: KE_light ≈ Q × A_heavy / (A_light + A_heavy).

Work it out, then check

Table B: your Q-value record
ReactionΔm (u)Q (MeV)KE of light product (MeV)Energy per kg of fuel (J/kg)

The binding-energy curve is the reason nuclear energy exists: moving nucleons from either end of the curve toward the peak releases energy. Part C uses this work area.

About this work area: This graph work area plots binding energy per nucleon against mass number for the lab nuclides, with the semi-empirical mass formula as a comparison curve. You choose a nuclide to highlight. The Readings panel gives the binding energies per nucleon you need for curve estimates, and the data table below lists every point.

Setup

Readings

Highlighted nuclide: BE/A (measured)—
BE/A, U-235—
BE/A near A = 120 (Sn-120)—
BE/A of H-2, H-3, He-4—
Semi-empirical coefficients (MeV)—

Curve estimates use BE/A read from the graph; the semi-empirical formula is BE = a_V A − a_S A^(2/3) − a_C Z(Z−1)/A^(1/3) − a_A (A − 2Z)²/A + δ.

Work it out, then check

Table C: your binding-energy-curve record
NuclideABE/A measured (MeV)BE/A semi-empirical (MeV)Difference (%)

A reaction can release energy (Q > 0) or need it (Q < 0). Charged projectiles must also be pushed close enough against the Coulomb barrier. Part D uses this work area.

About this work area: This graph work area charts the Q-value of seven nuclear reactions used in neutron sources, detectors and reactors, and the threshold energy of the endothermic ones. You choose a reaction. The Readings panel gives the atomic masses and the charges and mass numbers of the projectile and target, and the data table below lists every reaction.

Setup

Readings

Reaction—
Atomic masses in—
Atomic masses out—
Projectile (Z, A) and target (Z, A)—
Constants—

Q = 931.494 [Σm_in − Σm_out] MeV. Coulomb barrier E_C ≈ 1.44 Z₁Z₂ / [1.2(A₁^(1/3) + A₂^(1/3))] MeV.

Work it out, then check

Table D: your Q-value and threshold record
ReactionQ (MeV)Exo or endoCoulomb barrier (MeV)Threshold (MeV)

This accessible version provides the same set-up, work-out, and check exercises as the 3D and graph work areas, using native controls, data tables, and screen-reader announcements.

Team Questions

Question 1. He-4 has an atomic mass of 4.002602 u. Using m_H = 1.007825 u and m_n = 1.008665 u, what is its mass defect, in u?
Question 2. What is the binding energy of He-4, in MeV?
Question 3. Fe-56 has an atomic mass of 55.934936 u. What is its binding energy per nucleon, in MeV?
Question 4. Ra-226 (226.025410 u) decays to Rn-222 (222.017578 u) and He-4 (4.002602 u). What is the Q-value, in MeV?
Question 5. What kinetic energy does the alpha particle in Question 4 carry, in MeV?
Question 6. D–T fusion releases 17.59 MeV, shared between He-4 and a neutron. What kinetic energy does the neutron carry, in MeV?
Question 7: Challenge. If each fission of U-235 releases 200 MeV of recoverable energy, how much energy does 1.00 kg of U-235 release, in units of 10¹³ J? (e.g. 8.21)

Example Lab Report

Sample report showing the expected format and level of detail. Use it as a guide for your own submission, and include labelled screenshots of each setup.

Mass Defect, Binding Energy, and Reaction Q-Values

Nuclear Physics | Section: [Your Section] | Date: [Date]

Lab Members: [Names of all members present]

Purpose

To calculate the mass defect, binding energy, and binding energy per nucleon of nuclides across the periodic table from measured atomic masses; and to calculate the Q-values, particle energies, and energy per kilogram of fuel for alpha decay, beta decay, fusion, and fission; to estimate fission and fusion energy from the binding-energy curve and test the semi-empirical mass formula; and to find the Q-values, Coulomb barriers, and threshold energies of reactions used in neutron sources and detectors.

Theory

The mass defect is Δm = Z m_H + N m_n − M, and BE = 931.494 Δm MeV. The Q-value of a reaction is the mass lost times 931.494 MeV/u. For two products from rest, the lighter one carries Q × A_heavy/(A_light + A_heavy).

Δm = Zm_H + Nm_n − M  ·  BE = 931.494Δm  ·  Q = 931.494[Σm_in − Σm_out]  ·  KE_α = Q(A − 4)/A

Table A: Binding Energy Undergraduate

NuclideZNM (u)Δm (u)BE (MeV)BE/A (MeV)
H-2112.0141020.0023882.221.112
He-4224.0026020.03037828.307.074
Li-7347.0160030.04213239.255.607
C-126612.0000000.09894092.167.680
O-168815.9949150.137005127.627.976
Fe-56263055.9349360.528464492.268.790
Ni-62283461.9283450.585365545.268.795
Sn-1205070119.9022021.0955981020.548.505
Pb-20882126207.9766521.7567881636.447.867
U-23592143235.0439281.9150671783.877.591
U-23892146238.0507871.9342031801.707.570

Table B: Q-Values Undergraduate

ReactionΔm (u)Q (MeV)KE of light product (MeV)Energy per kg of fuel (J/kg)
Ra-226 → Rn-222 + α0.0052304.8724.785 (α)—
U-238 → Th-234 + α0.0045844.2704.198 (α)—
Po-210 → Pb-206 + α0.0058075.4095.306 (α)—
Co-60 → Ni-60 + β⁻ + ν̄0.0030312.8230 to 2.823 (shared)—
D + T → He-4 + n0.01888417.59014.072 (n)3.374 × 10¹⁴
n + U-235 → Ba-141 + Kr-92 + 3n0.186022173.278—7.113 × 10¹³

Sample calculation (fission): Δm = (1.008665 + 235.043928) − (140.914403 + 91.926173 + 3.025995) = 0.186022 u; Q = 173.3 MeV; per kg of U-235: 173.3 × 1.602×10⁻¹³ × 6.022×10²³ / 0.235044 = 7.11×10¹³ J/kg.

Table C: Binding-Energy Curve and Semi-Empirical Formula Upper undergraduateGraduate step

NuclideABE/A measured (MeV)BE/A semi-empirical (MeV)Difference (%)
He-447.0745.710−19.3
C-12127.6807.468−2.8
Fe-56568.7908.846+0.6
Sn-1201208.5058.548+0.5
Pb-2082087.8677.857−0.1
U-2352357.5917.645+0.7

Curve estimates: fission of U-235 ≈ 235 × (8.505 − 7.591) = 214.7 MeV; D–T fusion = 4(7.074) − 2(1.112) − 3(2.827) = 17.59 MeV, equal to the Table B mass result.

Graduate step: symmetric fission of U-236 into two Pd-118 from the semi-empirical formula: Q = 2(995.5) − 1803.2 = 187.7 MeV, compared with 214.7 MeV from the curve estimate and 173.3 MeV (prompt) for the Ba-141 + Kr-92 + 3n split in Table B.

Table D: Q-Values, Coulomb Barriers, and Thresholds Upper undergraduateGraduate step

ReactionQ (MeV)Exo or endoCoulomb barrier (MeV)Threshold (MeV)
¹⁴N(α,p)¹⁷O−1.193Endo4.2031.534
³H(p,n)³He−0.764Endo0.4911.019
⁷Li(p,n)⁷Be−1.645Endo1.2361.881
¹⁶O(n,p)¹⁶N−9.638Endonone (neutron)10.246
¹⁰B(n,α)⁷Li2.792Exonone (neutron)0
⁶Li(n,α)³H4.785Exonone (neutron)0
²H(d,n)³He3.270Exo0.4760

E_C = 1.44 Z₁Z₂/[1.2(A₁^(1/3) + A₂^(1/3))] MeV. Graduate step: the threshold column uses E_th = −Q(1 + m_a/m_A), e.g. ¹⁴N(α,p): 1.193 × (1 + 4.002602/14.003074) = 1.534 MeV.

Discussion

Binding energy per nucleon rose from 1.1 MeV for deuterium to a peak of 8.79 MeV at Fe-56 and Ni-62 (Ni-62 slightly higher), then fell to 7.6 MeV for uranium. He-4, at 7.07 MeV, stood well above its neighbours Li-7 and H-2, showing why alpha particles are such stable packages and why heavy nuclei emit them. Splitting U-235 into two fragments near A = 90 to 140 moves each nucleon up the curve by almost 1 MeV, giving the 173 MeV prompt Q-value; fusing D and T into helium moves a few nucleons up by several MeV each.

The alpha emitters each gave a single alpha energy close to the full Q-value, because the heavy daughter recoils with only about 2% of it. Co-60 β⁻ decay has a fixed Q-value but no fixed electron energy, because the antineutrino takes a variable share. Per kilogram of fuel, D–T fusion released 3.4 × 10¹⁴ J/kg, almost five times as much as U-235 fission (7.1 × 10¹³ J/kg prompt), and both are millions of times more than burning coal (about 2.9 × 10⁷ J/kg). Most fusion energy, 14.07 MeV of 17.59, leaves as fast neutrons.

The graph work areas turned the curve into energy estimates. Reading BE/A from the curve gave about 215 MeV per fission, close to the textbook 200 MeV, and gave exactly the D–T Q-value, because Q is simply the gain in total binding energy. The semi-empirical formula matched the measured curve to within 1% from Fe-56 to U-235 but missed He-4 by 19%, because light nuclei are dominated by shell structure that the liquid-drop terms do not describe. The reaction chart showed why ¹⁰B(n,α) and ⁶Li(n,α) make good thermal-neutron detectors (positive Q, no barrier), while (p,n) reactions on lithium and tritium need accelerated protons.

The graduate steps added the physics a designer needs. The semi-empirical formula gave 188 MeV for symmetric fission: the Coulomb energy falls by much more than the surface energy rises, so splitting a heavy nucleus releases energy even though the liquid-drop surface grows. Threshold energies were 3% (¹⁶O(n,p)) to 33% (³H(p,n)) above |Q|, because momentum conservation leaves part of the projectile energy in motion of the centre of mass; the light projectile on a light target pays the largest penalty. The 10.2 MeV threshold of ¹⁶O(n,p)¹⁶N means only the fastest fission neutrons make N-16, but they do so in every water-cooled reactor, which is why the main steam lines of a BWR are shielded.

Conclusion

Measured atomic masses gave the binding energy curve, which explains why both fission and fusion release energy. Q-values from mass differences matched the known alpha energies, and nuclear fuels release millions of times more energy per kilogram than chemical fuels.

Practice Questions

Show all work and include units. Use the mass table in the Theory section.

Question 1
Calculate the binding energy of the deuteron (H-2). A gamma ray of what minimum energy is needed to split it into a proton and a neutron?
Hint: the photodisintegration threshold equals the binding energy.
Question 2
Use the binding energy curve to estimate the energy released when U-235 (BE/A ≈ 7.6 MeV) splits into two fragments with BE/A ≈ 8.5 MeV.
Hint: ΔE ≈ A × Δ(BE/A).
Question 3
Calculate the Q-value of the reaction n + He-3 → H-3 + H-1, used in helium-3 neutron detectors (He-3 mass 3.016029 u).
Hint: use atomic masses throughout so electrons balance.
Question 4
Am-241 emits alpha particles with Q = 5.638 MeV. What is the alpha kinetic energy, and the recoil energy of the Np-237 daughter?
Hint: KE_α = Q(A − 4)/A.
Question 5
A 1000 MWe reactor has a thermal efficiency of 33%. How many kilograms of U-235 does it fission in a year, at 200 MeV per fission?
Hint: thermal energy per year ÷ energy per kg.
Question 6: Challenge
Why does the electron in β⁻ decay have a continuous energy spectrum while the alpha particle in α decay has a single energy? Use conservation of energy and momentum, and say how this led to the prediction of the neutrino.
Hint: count the products in each decay.