Virginia Research Institute
Virginia Research Institute
Virtual Laboratory  ·  Built by E2 Innovations
← Back to Virtual Labs|Cellular Respiration and ATP Yield
Cell & Molecular Biology · Bioenergetics

Cellular Respiration and ATP Yield

Account for ATP production in cellular respiration through four experiments: yield by stage, the contribution of the electron carriers NADH and FADH₂, aerobic versus anaerobic yield, and the effect of inhibitors and uncouplers. In each, predict the result yourself, then run the bench and check. Units: ATP per glucose, electron carriers.

Theory: Cellular Respiration & ATP Yield

Harvesting energy from glucose

Cells oxidize glucose in three connected stages — glycolysis, the Krebs cycle, and the electron transport chain — capturing the released energy as ATP. Most ATP comes from the ETC, which needs oxygen.

Key relationships Total ≈ 2 (glycolysis) + 2 (Krebs) + 28 (ETC) = 32 ATP  |  ETC ATP = 2.5·NADH + 1.5·FADH₂  |  Anaerobic = 2 ATP
Oxygen is the final electron acceptor; without it, only glycolysis runs.

Substrate-level vs oxidative

Glycolysis and the Krebs cycle make a little ATP directly (substrate-level, 4 total). The bulk is made by oxidative phosphorylation, where NADH and FADH₂ feed electrons into the chain to pump protons and drive ATP synthase.

With and without oxygen

Aerobically, one glucose yields about 32 ATP. Anaerobically, fermentation regenerates NAD⁺ so glycolysis can continue, but nets only 2 ATP — roughly 16× less.

Inhibitors and uncouplers

ETC inhibitors (e.g. cyanide) stop electron flow; uncouplers (e.g. DNP) make the membrane leak protons so energy escapes as heat. Either way oxidative ATP is lost and only the 4 substrate-level ATP remain.

Apparatus

The elements of cellular respiration. In the simulation these are modeled for you.

Mitochondrion
Cristae house the electron transport chain.
Electron Transport
Complexes pump protons; ATP synthase makes ATP.
Aerobic vs Anaerobic
32 ATP with oxygen, only 2 without.
Uncoupler
Protons leak back as heat, not ATP.

Instructions

The Simulation has four experiments on tabs. In each, set the control, work out the answer yourself first, enter your prediction, and press Check. Record every run. The 3D benches can be rotated and zoomed; the comparison tabs show graphs.

Experiment A: ATP Yield by Stage
1
On the Stages tab, choose a stage of respiration. Predict its ATP yield, then check. Confirm the stages sum to ~32.
Experiment B: Electron Carriers → ATP
2
On the Carriers tab, set the numbers of NADH and FADH₂. Predict the ETC ATP = 2.5·NADH + 1.5·FADH₂, then check.
Experiment C: Aerobic vs Anaerobic
3
On the Oxygen tab, set oxygen present or absent. Predict the ATP per glucose, then check.
Experiment D: Inhibitors & Uncouplers
4
On the Inhibitors tab, choose a treatment. Predict the ATP per glucose, then check. Note that only the 4 substrate-level ATP survive.

Simulation

Cellular Respiration Virtual LabFour experiments — pick a tab, predict, then check.
A mitochondrion with its cristae. Glycolysis occurs in the cytosol; the Krebs cycle in the matrix; the ETC along the cristae.

ATP Yield by Stage

Readout
StageTotal per glucose
ATP yield— hidden
Predict the ATP for this stage, then check.

Team Questions

Question 1. (A) About how many ATP does one glucose yield in full aerobic respiration?
Question 2. (A) Which stage produces the most ATP?
Question 3. (B) How much ETC ATP comes from 10 NADH and 2 FADH₂?
Question 4. (B) About how many ATP does each NADH drive at the ETC?
Question 5. (C) How many ATP per glucose result from anaerobic respiration (no oxygen)?
Question 6. (C) What is the final electron acceptor in aerobic respiration?
Question 7. (D) What does an uncoupler do to the proton gradient?
Question 8. (D) How many ATP remain when the ETC is blocked?

Cellular Respiration & ATP Yield — Four Experiments

Biology | Section: [Your Section] | Date: [Date]

Lab Members: [Names of all members present]

Purpose

To account for ATP production in cellular respiration through four experiments: yield by stage, the contribution of electron carriers, aerobic versus anaerobic yield, and the effect of inhibitors and uncouplers.

Theory

Per glucose, glycolysis and the Krebs cycle make 4 ATP by substrate-level phosphorylation; the ETC makes ~28 by oxidative phosphorylation (2.5 per NADH, 1.5 per FADH₂), for ~32 total. Without oxygen only 2 ATP are made, and blocking or uncoupling the ETC leaves only the 4 substrate-level ATP.

Results A — Yield by Stage

StageATP
No rows yet.

Worked example: 2 + 2 + 28 = 32 ATP.

Results B — Electron Carriers

NADHFADH₂ATP
No rows yet.

Worked example: 2.5×10 + 1.5×2 = 28 ATP.

Results C — Aerobic vs Anaerobic

Oxygen?ATP
No rows yet.

Worked example: aerobic 32, anaerobic 2 (≈16×).

Results D — Inhibitors

TreatmentATP
No rows yet.

Worked example: normal 32; uncoupler or inhibitor 4.

Discussion

The ETC accounted for the great majority of ATP; carrier ATP matched 2.5·NADH + 1.5·FADH₂; oxygen raised the yield from 2 to ~32; and both uncoupling and ETC inhibition collapsed the yield to the 4 substrate-level ATP.

Conclusion

Cellular respiration extracts most of glucose's energy at the oxygen-dependent electron transport chain. Anything that disables the chain — lack of oxygen, an inhibitor, or an uncoupler — slashes ATP output to a small fraction.

Practice Questions

1
A tissue delivers 8 NADH and 2 FADH₂ to the ETC. How much ATP does oxidative phosphorylation make?
Hint: 2.5×8 + 1.5×2 = 20 + 3 = 23 ATP.
2
A sprinting muscle runs out of oxygen. How does its ATP yield per glucose change, and what by-product forms?
Hint: It drops from ~32 to 2 ATP; lactate (lactic acid) forms as fermentation regenerates NAD⁺.
3
DNP was once sold as a diet drug. Using the uncoupler result, explain why it causes weight loss and dangerous overheating.
Hint: It uncouples the ETC, so cells burn fuel fast but make little ATP — the energy is released as heat, driving up metabolism and body temperature.
© 2026 E2 Innovations LLC / Virginia Research Institute. All rights reserved. Licensed for use on E2 Innovations and VRI sites only — not for redistribution or reuse in other courses. Contact info@e2innovations.ai.