Virginia Research Institute
Virginia Research Institute
Virtual Laboratory  ·  Built by E2 Innovations
← Back to Virtual Labs|Renal Filtration and Clearance
Anatomy & Physiology · Renal

Renal Filtration and Clearance

Investigate kidney function through five experiments: measuring GFR by clearance, the net filtration pressure, the filtration fraction, the glucose transport maximum, and how clearance reveals the handling of different substances. In each, predict the result yourself, then run the bench and check. Units: mL/min, mmHg, mg.

Theory: Renal Filtration and Clearance

How the kidney filters

Blood is filtered at the glomerulus into Bowman’s capsule. The rate of this filtration, the glomerular filtration rate (GFR), is about 125 mL/min. Filtration is driven by pressures (Starling forces) and the filtrate is then processed along the tubule.

Key relationships Clearance C = (U × V)/P  |  NFP = P(GC) − P(BC) − π(GC)  |  FF = GFR/RPF × 100
U = urine concentration, V = urine flow, P = plasma concentration; RPF = renal plasma flow.

Clearance and GFR

Clearance is the volume of plasma cleared of a substance per minute. A substance that is freely filtered and neither reabsorbed nor secreted — such as inulin — has a clearance equal to the GFR.

Net filtration pressure

Filtration is pushed by the glomerular hydrostatic pressure and opposed by the capsular hydrostatic pressure and the colloid osmotic pressure of the plasma proteins. Their balance is the net filtration pressure.

Reabsorption and the transport maximum

Useful substances are reabsorbed. Each carrier has a transport maximum (Tm): for glucose, about 375 mg/min. Below that, all filtered glucose is reabsorbed; above the renal threshold, glucose spills into the urine (glucosuria), as in uncontrolled diabetes.

Handling of substances

Comparing a substance’s clearance with the GFR reveals how the kidney handles it: a clearance below GFR means net reabsorption (glucose, urea), equal to GFR means filtration only (inulin), and above GFR means net secretion (PAH).

Apparatus

The structures and quantities a renal study tracks. In the simulation these are modeled for you.

Nephron
Glomerulus, capsule, and tubule.
Starling Forces
Pressures for and against filtration.
Transport Max
Filtered, reabsorbed, and excreted glucose.
Clearance
Compared with GFR to show handling.

Instructions

The Simulation has five experiments on tabs. In each, set the control, work out the answer yourself first, enter your prediction, and press Check. Record every run. The nephron benches can be rotated and zoomed; the others show a graph.

Experiment A: GFR by Clearance
1
On the Clearance tab, set the urine and plasma values. Predict the inulin clearance C = (U × V)/P, which equals the GFR, then check.
Experiment B: Net Filtration Pressure
2
On the Pressure tab, set the glomerular hydrostatic pressure. Predict NFP = P(GC) − 15 − 30, then check against the force bars.
Experiment C: Filtration Fraction
3
On the Fraction tab, set the renal plasma flow. Predict FF = GFR/RPF × 100, then check.
Experiment D: Glucose Transport Maximum
4
On the Glucose Tm tab, set the plasma glucose. Predict the glucose excretion = filtered − reabsorbed (reabsorption capped at 375 mg/min), then check.
Experiment E: Clearance & Handling
5
On the Handling tab, pick a substance. Predict its clearance C = (U × V)/P and compare it with the GFR to classify how the kidney handles it.

Simulation

Renal Filtration Virtual LabFive experiments — pick a tab, predict, then check.
Filtrate (yellow) forms at the glomerulus and flows along the tubule. Inulin clearance equals the GFR.

GFR by Clearance

Readout
Urine conc (U)125 mg/mL
Urine flow (V)1 mL/min
Plasma conc (P)1 mg/mL
Clearance (GFR)— hidden
Predict the clearance (GFR), then check.

Team Questions

Question 1. (A) With U = 125 mg/mL, V = 1 mL/min, P = 1 mg/mL, what is the clearance (mL/min)?
Question 2. (A) Which substance’s clearance is used to measure the GFR because it is only filtered?
Question 3. (B) With P(GC) = 55, P(BC) = 15, π(GC) = 30 mmHg, what is the net filtration pressure?
Question 4. (C) With GFR 125 and renal plasma flow 625 mL/min, what is the filtration fraction (%)?
Question 5. (D) Glucose begins to appear in the urine once reabsorption reaches its what?
Question 6. (D) At a plasma glucose of 400 mg/dL (filtered 500 mg/min), what is the excretion rate (mg/min)?
Question 7. (E) A substance whose clearance is greater than the GFR must undergo net what?
Question 8. (E) In a healthy person, what is the clearance of glucose (mL/min)?

Renal Filtration and Clearance — Five Experiments

Biology | Section: [Your Section] | Date: [Date]

Lab Members: [Names of all members present]

Purpose

To investigate kidney function: measuring GFR by clearance, the net filtration pressure, the filtration fraction, the glucose transport maximum, and how clearance reveals the handling of different substances.

Theory

Clearance C = (U × V)/P; inulin clearance = GFR. NFP = P(GC) − P(BC) − π(GC). FF = GFR/RPF × 100. Reabsorption of glucose caps at a transport maximum; clearance compared with GFR shows reabsorption, filtration only, or secretion.

Results A — Clearance (GFR)

U (mg/mL)V (mL/min)P (mg/mL)C (mL/min)
No rows yet.

Worked example: (125 × 1)/1 = 125 mL/min.

Results B — Net Filtration Pressure

P(GC) (mmHg)NFP (mmHg)
No rows yet.

Worked example: 55 − 15 − 30 = 10 mmHg.

Results C — Filtration Fraction

RPF (mL/min)FF (%)
No rows yet.

Worked example: 125/625 × 100 = 20%.

Results D — Glucose Tm

Plasma glucose (mg/dL)Filtered (mg/min)Excreted (mg/min)
No rows yet.

Worked example: 400 mg/dL → filtered 500, reabsorbed 375, excreted 125 mg/min.

Results E — Handling

SubstanceClearance (mL/min)Handling
No rows yet.

Worked example: PAH clearance ≈ 585 mL/min > GFR → net secretion.

Discussion

Inulin clearance gave the GFR; the net filtration pressure followed the Starling balance; the filtration fraction was about 20%; glucose excretion stayed zero until the transport maximum was exceeded; and comparing clearances with the GFR classified each substance’s handling.

Conclusion

Renal function can be quantified with clearance and the Starling forces, and the transport maximum and clearance ratios explain both normal handling of solutes and conditions such as the glucosuria of diabetes.

Practice Questions

1
A patient excretes creatinine at U = 90 mg/mL, V = 1.5 mL/min, with plasma P = 1.2 mg/mL. Estimate the GFR.
Hint: (90 × 1.5)/1.2 = 112.5 mL/min.
2
If the glomerular hydrostatic pressure falls to 45 mmHg (with the same opposing pressures), what happens to filtration?
Hint: NFP = 45 − 15 − 30 = 0 mmHg — filtration essentially stops.
3
Why does glucose appear in the urine of someone with uncontrolled diabetes?
Hint: High plasma glucose raises the filtered load above the transport maximum, so the excess is not reabsorbed.
© 2026 E2 Innovations LLC / Virginia Research Institute. All rights reserved. Licensed for use on E2 Innovations and VRI sites only — not for redistribution or reuse in other courses. Contact info@e2innovations.ai.