Virginia Research Institute
Virginia Research Institute
Virtual Laboratory  ·  Built by E2 Innovations
← Back to Virtual Labs|Renewable Energy Output
Environmental Science · Energy

Renewable Energy Output

Calculate renewable energy output in four experiments: solar panel power, wind turbine power (the v³ law), capacity factor, and energy delivered over time. In each, predict the result yourself, then run the bench and check. Units: W, kW, percent, kWh.

Theory: Renewable Energy Output

Turning sun and wind into power

A solar panel's output depends on its area, the sunlight falling on it, and its efficiency. A wind turbine's output depends on the cube of the wind speed. Both deliver less than their rated maximum on average — captured by the capacity factor.

Key relationships Solar: P = A × irradiance × efficiency  |  Wind: P = k × v³  |  Capacity factor = (average / rated) × 100  |  Energy: E = P × t
Wind power scales as v³, so a small rise in wind speed is a big rise in power.

The cube law

Because wind power goes as the cube of speed, doubling the wind gives eight times the power. This is why turbine siting in windy places matters so much.

Capacity factor and energy

No renewable source runs at full power all the time, so the capacity factor reports the fraction of rated output actually delivered. Multiplying power by time gives the energy in kilowatt-hours — the unit on an electricity bill.

Apparatus

The elements of a renewable-energy study. In the simulation these are modeled for you.

Solar Array
Area × irradiance × efficiency.
Wind (v³)
Power rises with the cube of speed.
30% of rated
Capacity Factor
Average output vs the rated maximum.
Energy (kWh)
Power multiplied by time.

Instructions

The Simulation has four experiments on tabs. In each, set the control, work out the answer yourself first, enter your prediction, and press Check. Record every run. The 3D benches can be rotated and zoomed; the graph tabs show curves.

Experiment A: Solar Panel Output
1
On the Solar tab, set the panel area. Predict P = area × 1000 × 0.2, then check.
Experiment B: Wind Turbine Power
2
On the Wind tab, set the wind speed. Predict P = 0.06 × v³, then check.
Experiment C: Capacity Factor
3
On the Capacity tab, set the average output. Predict CF = (average / 50) × 100, then check.
Experiment D: Energy = Power × Time
4
On the Energy tab, set the run time. Predict E = 4 × t, then check.

Simulation

Renewable Energy Virtual LabFour experiments — pick a tab, predict, then check.
A solar array under full sun; adding panels adds area and power. Rotate to view.

Solar Panel Output

Readout
Irradiance1000 W/m²
Efficiency0.20
Area10 m²
Power— hidden
Predict the power output (W), then check.

Team Questions

Question 1. (A) A 10 m² array at 1000 W/m² and 0.2 efficiency produces what power?
Question 2. (A) Besides area, what two things set a panel's output?
Question 3. (B) With P = 0.06v³, what is the power at 10 m/s?
Question 4. (B) If the wind speed doubles, by what factor does the power rise?
Question 5. (C) A 50 kW turbine averages 15 kW. What is its capacity factor?
Question 6. (C) What does the capacity factor measure?
Question 7. (D) How much energy does a 4 kW source deliver in 6 hours?
Question 8. (D) Why are wind and solar called "intermittent" sources?

Renewable Energy Output — Four Experiments

Biology | Section: [Your Section] | Date: [Date]

Lab Members: [Names of all members present]

Purpose

To calculate renewable energy output: solar panel power, wind turbine power, capacity factor, and energy delivered over time.

Theory

Solar power = area × irradiance × efficiency; wind power = k·v³; capacity factor = (average/rated) × 100; and energy = power × time.

Results A — Solar

Area (m²)Power (W)
No rows yet.

Worked example: 10 × 1000 × 0.2 = 2000 W.

Results B — Wind

Wind (m/s)Power (kW)
No rows yet.

Worked example: 0.06 × 10³ = 60 kW.

Results C — Capacity Factor

Average (kW)CF (%)
No rows yet.

Worked example: 15 / 50 × 100 = 30%.

Results D — Energy

Time (h)Energy (kWh)
No rows yet.

Worked example: 4 × 6 = 24 kWh.

Discussion

Solar power scaled directly with area; wind power climbed steeply with the cube of speed; the capacity factor stayed well below 100%; and energy grew in step with run time.

Conclusion

Renewable output follows simple physics: area and sunlight for solar, the cube of speed for wind. Capacity factors below 100% and the intermittency of sun and wind are why storage and grid planning matter.

Practice Questions

1
A 25 m² array runs at 1000 W/m² and 0.2 efficiency. Find its power.
Hint: 25 × 1000 × 0.2 = 5000 W.
2
Using P = 0.06v³, compare the power at 4 m/s and 8 m/s.
Hint: 3.84 kW vs 30.7 kW — eight times more at double the speed.
3
A solar farm rated at 100 kW averages 20 kW. What is its capacity factor, and how much energy does it deliver in 24 h?
Hint: CF = 20%; energy = 20 kW × 24 h = 480 kWh.
© 2026 E2 Innovations LLC / Virginia Research Institute. All rights reserved. Licensed for use on E2 Innovations and VRI sites only — not for redistribution or reuse in other courses. Contact info@e2innovations.ai.